Scupper with Angled Face

Scupper with Angled Face provides a sleek and functional solution for roof drainage through parapet or perimeter walls. Unlike flat-faced scuppers, the angled front is intentionally designed to redirect water outward and downward, helping to reduce splash-back and protect adjacent wall surfaces. As water exits the roof, the angle encourages more efficient flow, especially during heavy downpours.

Because scuppers are typically installed at low points in the roof edge, it’s crucial that they perform consistently. The angled face improves both performance and aesthetics, adding a dimensional architectural detail to the building’s façade. In many cases, this design also helps prevent staining on walls by guiding runoff away more cleanly.

Each unit is fabricated to meet exact project specifications. We manufacture them using 26ga or 24ga Stainless steel, 26ga or 24ga galvanized steel, or 16 oz. copper. We can also make them in Kynar 500® .032 or .040 Aluminum, or TPO upon request.

Additionally, our angled-face scuppers can be made with flanges, drip edges, or welded seams, depending on the roof design and membrane type. Internal linings and backplates are available for full integration with waterproofing systems.

Key Features:

• Angled face improves water flow and prevents splash-back

• Adds modern design detail to parapet openings

• Made from aluminum, steel, or copper

• Available in durable Kynar 500® finishes

• Custom-fabricated to fit specific wall dimensions

• Options include welded seams, liners, and flanges

Commonly Used With:

• Leader Heads – For downstream water collection

• Downspouts and Elbows – To direct runoff further from the wall

• Parapet Flashing – For clean transitions and waterproofing